AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor

AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor

AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor

AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor

AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor

AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor

AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor

AHS-DRY Raypa autoclaves Intended use: Suitable to sterilize: wrapped or unwrapped solids, small porous elements and hollow elements type B (slightly deep and broad cavities). glass, plastic, metallic elements, waste bags. Features: Chamber, lid and closure made of AISI-304 stainless steel Total control by microprocessor: Ten sterilization programs. Six programs are user free. 7 Litres feeding water reservoir. Automatic water filling. Automatic drying Includes RS-232 port to connect to a printer/PC. Safety: Safety valve and thermostat. Door hydraulic blocking system. Open lid sensor

AHS-DRY Raypa autoclaves Intended use: Suitable to sterilize: wrapped or unwrapped solids, small porous elements and hollow elements type B (slightly deep and broad cavities). glass, plastic, metallic elements, waste bags. Features: Chamber, lid and closure made of AISI-304 stainless steel Total control by microprocessor: Ten sterilization programs. Six programs are user free. 7 Litres feeding water reservoir. Automatic water filling. Automatic drying Includes RS-232 port to connect to a printer/PC. Safety: Safety valve and thermostat. Door hydraulic blocking system. Open lid sensor

Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Wall-unit for connection to tap water, suitable for the production purified and deionised water in low volumes. During deionization all inorganic substances are removed, so that an absolute ionic purity is achieved. It includes a conductivity meter for actual reading of the produced water conductivity (µS/cm).

Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Natural air convection. Adjustable temperature from room +5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Double walls and door insulated with low conductivity glass wool.

Features Natural air convection. Adjustable temperature from room +5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Double walls and door insulated with low conductivity glass wool.

Features Natural air convection. Adjustable temperature from room +5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Double walls and door insulated with low conductivity glass wool.

Features Adjustable temperatures: from 35º C to 200º C. Temperature homogeneity:± 4º C Temperature stability:± 1º C Temperature display accuracy:± 2º C Maximum admissible vacuum: 0,01 mbar. Safety according to: EN-61010-1, EN-61010-2-010. Double safety glass against implosions according to regulations Safety thermostat: class 2 incorporated from factory. Time and temperature controller: digital by microprocessor. Temperature probe: Pt 100 Class A Epoxy resin oven painted external case. Interior made in polished stainless steel AISI 304.

Features Adjustable temperature to 1150º C Stability of temperature: ±1º C Homogeneity of temperature: ±5º C The system has a digital control for temperature/time by microprocessor. Control P.I.D. with thermocouple type K. Nine user free programs. Each one has a waiting time to start. 18 different segments can be edited and modified in all user free programs. Every segment has a slope and a maintenance time Heating by thermo-ceramic plates. Double body door Fibre-ceramic thermo insulation with low thermo conductivity and low density material. Safety system that disconnect the electrical heater when the door is opened. Include the exhaust device to allow the fumes and gases go outside.

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Environment: 0 to 50ºC, max RH 95%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Environment: 0 to 50ºC, max RH 95%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Environment: 0 to 50ºC, max RH 95%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by microprocessor Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Connection to PC (USB) Control software (optional) Environment: 0 to 50ºC, max RH 85%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by microprocessor Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Connection to PC (USB) Control software (optional) Environment: 0 to 50ºC, max RH 85%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by microprocessor Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Connection to PC (USB) Control software (optional) Environment: 0 to 50ºC, max RH 85%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by microprocessor Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Connection to PC (USB) Control software (optional) Environment: 0 to 50ºC, max RH 85%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by microprocessor Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Connection to PC (USB) Control software (optional) Environment: 0 to 50ºC, max RH 85%

Features Natural air convection. Adjustable temperature from room temperature +5º C to 80º C. Temperature regulation by microprocessor Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Connection to PC (USB) Control software (optional) Environment: 0 to 50ºC, max RH 85%

Features Adjustable temperatures: from 0º C to 45º C. Time and temperature control by microprocessor. Temperature probe: Pt 100 Class A Cooling by hermetic compressor Temperature homogeneity:± 1,5º C. Temperature stability: ± 0, 15º C. Forced air convection. Two free sockets inside

Features Adjustable temperatures: from 0º C to 45º C. Time and temperature control by microprocessor. Temperature probe: Pt 100 Class A Cooling by hermetic compressor Temperature homogeneity:± 1,5º C. Temperature stability: ± 0, 15º C. Forced air convection. Two free sockets inside

Features Adjustable temperatures: from 0º C to 45º C. Time and temperature control by microprocessor. Temperature probe: Pt 100 Class A Cooling by hermetic compressor Temperature homogeneity:± 1,5º C. Temperature stability: ± 0, 15º C. Forced air convection. Two free sockets inside

Features Completely transistorized built in high frequency electric generator. Working frequency 35 Khz. Temperature regulation by microprocessor with digital read out (from ambient +5º C to 90º C). Timer 0 - 99 minutes. Cleaning tray made of stainless steel 18/10. External case made of stainless steel AISI-316. Heating by semi-detached elements at the tray. Complete-half wave selector. It allows less power consume in some applications. Draining tap incorporated.

Features Generator of electric energy at high frequency completely transistorized. Working frequency 35 kHz. Adjustable temperature up to 80 ºC. Analogue regulation of temperature by hydraulic thermostat. Cleaning tank made of stainless steel 18/10. External case made of stainless steel AISI-304. Heating element with attached elements to the tray. Complete-half wave selector. It allows less power consume in some applications. Draining valve incorporated.

Features Generator of electric energy at high frequency completely transistorized. Working frequency 35 kHz. Adjustable temperature up to 80 ºC. Analogue regulation of temperature by hydraulic thermostat. Cleaning tank made of stainless steel 18/10. External case made of stainless steel AISI-304. Heating element with attached elements to the tray. Complete-half wave selector. It allows less power consume in some applications. Draining valve incorporated.

The AMR-100 Microplate Reader, with a wavelength range of 340–750nm, is a high-performance solution for a wide range of applications, including immunoassays with colorimetric substrates, such as ELISA, and protein assays such as Bradford and Lowry. It is designed for applications within the clinical, biotechnology research and pharmaceutical laboratory. The AMR-100 can be used as a stand-alone reader or be controlled by a PC or a PAD with Android system.The AMR-100 Microplate Reader, with a wavelength range of 340–750nm, is a high-performance solution for a wide range of applications, including immunoassays with colorimetric substrates, such as ELISA, and protein assays such as Bradford and Lowry. It is designed for applications within the clinical, biotechnology research and pharmaceutical laboratory. The AMR-100 can be used as a stand-alone reader or be controlled by a PC or a PAD with Android system.The AMR-100 Microplate Reader, with a wavelength range of 340–750nm, is a high-performance solution for a wide range of applications, including immunoassays with colorimetric substrates, such as ELISA, and protein assays such as Bradford and Lowry. It is designed for applications within the clinical, biotechnology research and pharmaceutical laboratory. The AMR-100 can be used as a stand-alone reader or be controlled by a PC or a PAD with Android system.The AMR-100 Microplate Reader, with a wavelength range of 340–750nm, is a high-performance solution for a wide range of applications, including immunoassays with colorimetric substrates, such as ELISA, and protein assays such as Bradford and Lowry. It is designed for applications within the clinical, biotechnology research and pharmaceutical laboratory. The AMR-100 can be used as a stand-alone reader or be controlled by a PC or a PAD with Android system.

 Nano-300  is an advanced model of Micro UV VIS Spectrophotometer based on Nano-100, with full range of wavelength (200-800nm). It is with an added new function of bacterium cell concentration measurement (OD600) in a cuvette. The Nano-300 only requires 0.5-2ul sample to measure nucleic acids, protein as quickly like Nano-100 do. Nano-300 come with a 7 inch touch screen and integranted Android operating system, with no computer required. It is an ideal equipment for a biology laboratory to make life science research more efficient.

Bioprep-24 is your solution for sample preparation and cell lysis. The reliable, fast and high-throughput homogenizer to extract DNA, RNA or proteins from aniaml, human and plant tissues, micro-organisms, spores, bones, etc. Grind and homogenize a large range of biological samples, compatible with any analysis DNA-RNA Electrophoresis, Liquid Chromatography, Western Blot etc.Bioprep-24 is your solution for sample preparation and cell lysis. The reliable, fast and high-throughput homogenizer to extract DNA, RNA or proteins from aniaml, human and plant tissues, micro-organisms, spores, bones, etc. Grind and homogenize a large range of biological samples, compatible with any analysis DNA-RNA Electrophoresis, Liquid Chromatography, Western Blot etc.Bioprep-24 is your solution for sample preparation and cell lysis. The reliable, fast and high-throughput homogenizer to extract DNA, RNA or proteins from aniaml, human and plant tissues, micro-organisms, spores, bones, etc. Grind and homogenize a large range of biological samples, compatible with any analysis DNA-RNA Electrophoresis, Liquid Chromatography, Western Blot etc.Bioprep-24 is your solution for sample preparation and cell lysis. The reliable, fast and high-throughput homogenizer to extract DNA, RNA or proteins from aniaml, human and plant tissues, micro-organisms, spores, bones, etc. Grind and homogenize a large range of biological samples, compatible with any analysis DNA-RNA Electrophoresis, Liquid Chromatography, Western Blot etc.

The SealBio-2 Plate Sealer is a semi-automatic thermal sealer which is ideal for the low to medium throughput laboratory that requires uniformand consistent sealing of micro-plates. 1. With a small footprint (178×370mm), takes up less precious bench space than comparable instruments 2. Available with a variety of available heat seals meet any laboratory application, including PCR, coulorimetric, fluorescence, long term storage, low emperature storage 3. Formart different micro well plates and heat seals.The SealBio-2 Plate Sealer is a semi-automatic thermal sealer which is ideal for the low to medium throughput laboratory that requires uniformand consistent sealing of micro-plates. 1. With a small footprint (178×370mm), takes up less precious bench space than comparable instruments 2. Available with a variety of available heat seals meet any laboratory application, including PCR, coulorimetric, fluorescence, long term storage, low emperature storage 3. Formart different micro well plates and heat seals.The SealBio-2 Plate Sealer is a semi-automatic thermal sealer which is ideal for the low to medium throughput laboratory that requires uniformand consistent sealing of micro-plates. 1. With a small footprint (178×370mm), takes up less precious bench space than comparable instruments 2. Available with a variety of available heat seals meet any laboratory application, including PCR, coulorimetric, fluorescence, long term storage, low emperature storage 3. Formart different micro well plates and heat seals.The SealBio-2 Plate Sealer is a semi-automatic thermal sealer which is ideal for the low to medium throughput laboratory that requires uniformand consistent sealing of micro-plates. 1. With a small footprint (178×370mm), takes up less precious bench space than comparable instruments 2. Available with a variety of available heat seals meet any laboratory application, including PCR, coulorimetric, fluorescence, long term storage, low emperature storage 3. Formart different micro well plates and heat seals.

MK2000 series dry bath incubator are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points and a wide variety of other laboratory procedures. Heat up to 105 C ,optional external temperature probe.

MK2000 series dry bath incubator are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points and a wide variety of other laboratory procedures. MK2000-2E is an innovative design accommodating two blocks with independent digital temperature control. Each block can be set at different temperatures - ideal for multiple users or for applications where samples have to be transferred between two temperatures very quickly. Heat up to 105 C ,optional external temperature probe.

MK200-2 is high temperature dry bath incubator controlled by microcomputer, the highest temperture of MK200-2 can reach 150 C.

The MiniT series dry bath incubator combine a microprocessor-controlled, a fast heating micro-tube block. The MiniT series are suitable for a range of uses in life science, molecular biology, environmental and industrial laboratories and a variety of applications including incubation, enzyme reactions, immuno-assays. The small form factor allows these to find a place on even the most crowded laboratory benchtop and easy to move. RT+5°C~100°C of the temperature control range.

The MiniT series dry bath incubator combine a microprocessor-controlled, a fast heating micro-tube block. The MiniT series are suitable for a range of uses in life science, molecular biology, environmental and industrial laboratories and a variety of applications including incubation, enzyme reactions, immuno-assays. The small form factor allows these to find a place on even the most crowded laboratory benchtop and easy to move.The temperature control range of RT+5°C~100°C and can be heating lid.

The MiniT series dry bath incubator combine a microprocessor-controlled, a fast heating micro-tube block. The MiniT series are suitable for a range of uses in life science, molecular biology, environmental and industrial laboratories and a variety of applications including incubation, enzyme reactions, immuno-assays. The small form factor allows these to find a place on even the most crowded laboratory benchtop and easy to move. The temperature control range of 0°C~100°C.

Designed for simultaneous heating and mixing of small samples, MS-100 can be supplied with interchangeable blocks for microtubes. Mixing and heating modes can be used either simultaneously or independently. The main body of the Mixing Block can be used with different kinds of blocks.