The MicroPette Plus pipettes can be fully autoclaved, enablingeasy cleaning for reduced risk of contamination.Steamautoclaving can be performed at 121 °C, 1 bar for 20 minutes.After autoclaving the pipette must be cooled down and left todry for 12 hours before use.It is recommended to check the performance of the pipetteafter each autoclaving. Greasing of the pipette piston and seal after every 10th autoclaving will secure an enhanced function.

-Autoclaves are equipment for sterilizing widely used in microbiology, medicine, podiatry, tattooing, body piercing, veterinary science, mycology, dentistry, and prosthetics fabrication. They vary in size and function depending on the media to be sterilized. -Adopting European N standard, with thermal vacuum and drying functions, it can be used for A-type hollow instruments and solid instruments. -Thermodynamic vacuum guarantees elimination of cold air from the cavity and makes sure that reaches the optimal effect of sterilization. -Specially design for dental clinic field, it could sterilize 12 pieces hand piece at same time, simply and efficiently. -Sliding door design for easy secure operating-for BKM-Z2. Microprocessor control, LCD or LED display and modularized panel for easy operation. -Automatic malfunction detection system makes easy maintaining.

INCUBATOR,100L (First Version) Temp Range : RT.+5 ํC - 70  ํC  Temp.Controller : PID Microprocessor Time Range : 00.00 to 99HR 59 min

Special multi-flow air cooling design with patent ensures fast cooling of the rotor and low energy consumption, Unique temperature display appropriate for gentle handing of sensitive samples, Bio-safe rotor/anti-sample overflow prevents accidental leakage in centrifugal process allowing risk-free microbial contamination, High strengh aluminum alloy rotor can be fully autoclaved for unlimited service life, Four rotors are optional complete with 24 places 1.5/2.0ml tubes, bigger 5.0ml, smaller 0.2ml and 0.5ml tubes with the use of adapters.

Application range： Vertical Autoclave is mainly used in hospitals, laboratories, universities and other institutes where users need to sterilize temperature-resistance solid and liquid.

Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.

Pre-cooling program ensures optimal protection of the sample before warming, Guaranteed 2°C cooling within only 7 minutes for both chamber and samples even at maximun speed and capacity utilization, Sound-alert allows your undivided attention on other tasks warming, Locked lid after operation maintains the chamber temperature, Intermittent temperature control mode, CFC-free refrigerant and low carbon life rotor capacity, Bio-safe rotor/anti-sample overflow prevents accidental leakage in centrifugal process allowing risk-free microbial contamination, High strengh aluminum alloy rotor can be fully autoclaved for unlimited service life.

เครื่องนึ่งฆ่าเชื้อ ขนาดความจุ 60 ลิตร ทำอุณหภูมิสูงสุด (Max Temp.) 130 องศาเซลเซียส  

Autoclave (Sterilizer)        An autoclave is a strong heated container used for chemical reactions and other processes in need of high amounts of pressure and temperature. Sterilization Autoclaves have a variety of uses in the fields of microbiology, medicine, podiatry, tattooing, body piercing, veterinary science, mycology, funeral homes, dentistry, prosthetics fabrications, etc.

Max 130°C Vertical Autoclave 100L. Material External  : Steel Plate with Powder Heating Coated Dimension External (W×D×H ) :  550x680x1070mm 650x780x1150 mm

AHS-DRY Raypa autoclaves Intended use: Suitable to sterilize: wrapped or unwrapped solids, small porous elements and hollow elements type B (slightly deep and broad cavities). glass, plastic, metallic elements, waste bags. Features: Chamber, lid and closure made of AISI-304 stainless steel Total control by microprocessor: Ten sterilization programs. Six programs are user free. 7 Litres feeding water reservoir. Automatic water filling. Automatic drying Includes RS-232 port to connect to a printer/PC. Safety: Safety valve and thermostat. Door hydraulic blocking system. Open lid sensor

AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor

AHS-DRY Raypa autoclaves Intended use: Suitable to sterilize: wrapped or unwrapped solids, small porous elements and hollow elements type B (slightly deep and broad cavities). glass, plastic, metallic elements, waste bags. Features: Chamber, lid and closure made of AISI-304 stainless steel Total control by microprocessor: Ten sterilization programs. Six programs are user free. 7 Litres feeding water reservoir. Automatic water filling. Automatic drying Includes RS-232 port to connect to a printer/PC. Safety: Safety valve and thermostat. Door hydraulic blocking system. Open lid sensor

AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor

AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor

AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor

AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor

AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor